User Guide

Installing Novell iFolder on Novell Cluster Services 35
Novell iFolder Administration Guide
103-000132-001
November 21, 2001
Novell Confidential
Manual 99a38 July 17, 2001
For more information, see Novell Cluster Services (http://
www.novell.com/documentation/lg/ncs6p/index.html) > Installation
and Setup > Setting Up Cluster Services.
3 Create a folder on the cluster-enabled volume.
4 Choose one iFolder server in the cluster and go to the
SYS:Apache\iFolder\Server directory and edit the
HTTPD_NW_ADDITIONS.CONF file.
The following parameters for the LDAP Host, iFolderServerRoot, and the
Virtual Host must be modified in two places in the
HTTPD_NW_ADDITIONS.CONF file. One listing is for the unsecured
port (usually 80) and the other listing is for the secured port (usually 443).
Both parameters must be modified.
Make the following adjustments:
Set the LDAP Host to the IP address or DNS name that you assigned
to the cluster-enabled volume.
Set the iFolderServerRoot to the folder that you created on the
cluster-enabled volume.
For example, if your cluster-enabled volume was called
SHAREDVOL and you had created a folder on that volume called
NIFDIR, you would set the iFolderServerRoot to
SHAREDVOL:\NIFDIR.
Set the Virtual Host to the IP address or DNS name that you assigned
to the cluster-enabled volume.
5 Save your edits and then copy the edited
HTTPD_NW_ADDITIONS.CONF file to every iFolder server in the
cluster.
6 Choose one iFolder server in the cluster and go to the
SYS:Apache\iFolder\Server directory and edit the HTTPD.CONF file.
7 Modify the following parameters:
Locate the Listen parameter. Set this parameter to the IP address of
the cluster-enabled volume by either adding a new Listen parameter
or by modifying an existing one.