User Guide

103-000182-001
August 29, 2001
3
QuickStart Rev 99a44 August 22, 2001
5 (Optional) Specify IP addresses or DNS names of servers in other eDirectory trees that have
at least read/write eDirectory replicas, or specify the same IP address or DNS name you used
for the primary eDirectory server but with a different context.
You can add two alternate eDirectory server IP addresses or DNS names and context settings.
These alternate settings are used to allow NetStorage to find User objects that exist in
contexts other than what you specified for the primary eDirectory server. The alternate
settings also allow NetStorage to find User objects with the same name in different
eDirectory trees. The alternate URL and context settings are optional, but can help provide
users with an additional level of access to NetStorage.
6 (Optional) Specify the IP address or DNS name and the port number that you assigned to
Novell iFolder
TM
.
If you are installing NetStorage during the NetWare 6 installation, you can click the Back
button to go back and view the screen where the IP address and port number assignments
were made. This does not necessarily have to be the IP address or DNS name of the server
where NetStorage is to be installed.
The iFolder DNS name or IP address and the port number are optional but, if specified, will
allow NetStorage users to access and manipulate files and directories on the iFolder server.
Installing Novell NetStorage after the NetWare 6 Installation
If you did not install NetStorage during the NetWare 6 installation, you can install it later by
completing the following steps:
1 Insert the NetWare 6 Operating System CD into your NetWare 6 server.
You might need to load CDROM.NLM on the server to access the NetWare 6 Operating System
CD.
2 From the Novell menu on the NetWare 6 console GUI, select Install.
3 Click Add and then browse to the root of the NetWare 6 Operating System CD.
4 Select the PRODUCT.NI file and click OK.
5 Check the NetStorage component check box and deselect all other components or products
unless you specifically want to install them.
6 Continue with Step 4 on page 2 to complete the NetStorage installation.
IMPORTANT: If you install NetStorage after the NetWare 6 installation, you must restart your
NetWare 6 server after completing the NetStorage installation.