User Guide
26 Novell Storage Services Administration Guide
Novell Storage Services Administration Guide
103-000141-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
This opens the ConsoleOne interface where you can access the snap-ins
for managing NSS. The NSS configuration features are in the Media
snap-in.
Setting Up ConsoleOne on a Workstation
To use ConsoleOne on a client workstation, you need to load ConsoleOne 1.3
or later. Then you must copy the NSS JAR files from your server to your client
machine.
1 Copy these three NSS JAR files to your local LIB directory:
public\mgmt\consoleone\1.3\lib\nssadmin.jar
public\mgmt\consoleone\1.3\lib\nssc1lib.jar
public\mgmt\consoleone\1.3\lib\nssjavalib.jar
2 Copy these two JAR files to your local RESOURCES directory:
public\mgmt\consoleone\1.3\resources\nssadminres.jar
public\mgmt\consoleone\1.3\resources\nssc1libres.jar
3 Copy the following JAR file to your local SNAPINS directory:
public\mgmt\consoleone\1.3\snapins\nssadminreg.jar
Configuring Disk Space
To set up the NSS storage and file system, complete the following tasks in the
given order:
1. Create a RAID device (optional).
See “Creating a RAID Device” on page 27.
2. Create partitions.
See “Creating a Partition” on page 29.
3. Mirror partitions.
See “Creating a Partition” on page 29.
4. Create storage pools.
See “Creating a Storage Pool” on page 31.
5. Create logical and traditional volumes.
See “Creating a Logical Volume” on page 32 and “Creating a Traditional
Volume” on page 37.