User Guide

Setting Up and Configuring Novell Storage Services 49
Novell Storage Services Administration Guide
103-000141-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NSS Server Console Commands
Use the following commands at the server console to view NSS information
and perform tasks.
Online Help Commands
Enter nss /help or nss /? to access Help.
NSS Configuration Information Commands
nss /modules Lists the providers, loadable storage subsystems, and
semantic agents.
nss /status Lists the current NSS status.
volumes Lists all NetWare and NSS volumes that are mounted,
including Admin volume.
nss volumes Lists all NSS volumes, including the Admin volume.
Other NSS Commands
nss /Activate=volume_name Activates an NSS volume.
nss /Deactivate=volume_name Deactivates an NSS volume.
nss /Maintenance=volume_name Switches the specified NSS
volume to maintenance mode.
nss /ForceActivate=volume_name Forces an NSS volume to
become active.
nss /StorageAlarmThreshold=value Lets you set the threshold
for a low storage space warning. The default is 10. The range is 0 to
1000000.
nss /StorageResetThreshold=value Lets you reset the
threshold for a low storage space warning. The default is 10. The range is
1 to 1000000.
nss /(No)StorageAlertMessages Turns ON or OFF the low
storage message to users. The default is ON.
nss /NumWorkToDo=value Sets the number of WorkToDo entries
which may be concurrently executing. NSS uses WorkToDo entries for