User Guide

52 Novell Storage Services Administration Guide
Novell Storage Services Administration Guide
103-000141-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
 PoolRebuild Select pools from a menu and rebuild them.
 PoolVerify=pool Verify the specified pool’s physical integrity.
 PoolVerify Select pools from a menu and verify their physical
integrity.
 LogicalVolumePurgeDelayAfterLoad The number of seconds
to delay purging deleted logical volumes. This allows time to reverse the
deletion.
 LogicalVolumePurgeDelayAfterContinue The number of
seconds to delay purging a logical volume after clicking continue. After
a volume starts to purge, it cannot be salvaged.
 VolumeMaintenance Places a volume into a maintenance mode.
Volumes can be put in maintenance mode, but maintenance only occurs
at the storage pool level.
 MFL=volume Enables MFL maintenance for the volumes.
 NoMFL=volume Disable MFL maintenance for the volumes.
 MFLVerify=volume Get the status of MFL maintenance for the
volumes.
 FixMFL MFL maintenance for the volumes.
 GetMFLStatus Get the status of MFL maintenance for the volumes.
 VolumeAutoActivate Activates volume at load time.
 VolumeAutoDeactivate Deactivates volume at load time.
 VolumeAutoDisplay Displays current volume load time policies.
 ZLSSIOStatus Displays current NSS IO status information.
 ZLSSPendingWriteIOs Number of write IOs dropped to the storage
subsystem. (0 = all available) [Value=1000 Range=0 - 3000].
 ZLSSVolumeUpgrade Allow the 5.x/ZLSS VolumeUpgrade to the
NetWare 6 format to occur during the installation process.
 LVDeleteStatusBasic Displays information about deleted logical
volumes.
 LVDeleteStatusSalvagable Displays information about
salvagable logical volumes.
 ZLSSPoolScan Scans for and loads all ZLSS pools.