User Guide

Installation and Setup
Novell Cluster Services Overview and Installation
103-000154-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
To finish creating a cluster resource template, you need to configure load
and unload scripts, set failover and failback modes and, if necessary,
change the node assignments for the resource template.
Using NetWare Remote Manager
On the left column under the Clustering section, click Cluster Config.
At the bottom of the screen above Create New Objects, click New Cluster
Resource.
Enter a name for the new cluster resource template.
Check the Create Resource and the Define Additional Properties check
boxes and then click Apply.
Continue with “Configure Load Scripts” on page 30.
Create Cluster Resources
Cluster resources must be created for every resource or application you run on
servers in your cluster. Cluster resources can include Web sites, e-mail servers,
databases, and any other server-based applications or services you want to
make available to users at all times.
Using ConsoleOne
Browse and select the Cluster object you want to create resources for.
Click File > New > Cluster > Cluster Resource.
Enter a name for the new cluster resource.
Do not use periods in cluster resource names. NetWare and
NetWare clients interpret a period as a delimiter.
If a template exists for the resource you are creating, enter the template
name in the Inherit From Template field, or browse and select it from the
list. If a template does not exist, check the Define Additional Properties
check box.
(Conditional) Check the Online Resource after Create check box if you
want the resource to automatically start on the master node as soon as it
is created and configured.
Click Create.
(Conditional) If you are not using a template for the resources, continue
with “Configure Load Scripts” on page 30.