User Guide

Installation and Setup
Novell Cluster Services Overview and Installation
103-000154-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Using ConsoleOne
Select the Load Script tab on the resource property page.
Edit or add the necessary commands to the script to load the resource on
the server.
Some commands may require command line input. You can add << to a
command to indicate command line input. For example, a script
command might read
LOAD SLPDA <<Y
This means that when SLPDA is loaded, it will receive a Y at the
command line, presumably to a question that needs a Yes answer. If more
inputs are required, they can be continued on subsequent lines, as follows:
LOAD SLPDA <<Y
<<Y
<<N
The string can be up to 32 characters.
Specify a timeout value.
The default is 600 seconds, or 10 minutes. The timeout value determines
how much time the script is given to complete. If the script does not
complete within the specified time, the resource becomes comatose.
Using NetWare Remote Manager
On the left column under the Clustering section, click Cluster Config.
From the list of Resources, select the desired resource or resource
template.
On the Resource Information screen, click Loading.
Edit or add the necessary commands to the script to load the resource on
the server.
For more details on load script commands see the instructions above on
configuring load scripts using ConsoleOne.
Specify the Load Timeout and click Apply to save the script.
This is the same as the timeout value described in the above instructions
on configuring load scripts using ConsoleOne.