User Guide

Setting Up 63

Storage Management Services Administration Guide

103-000134-001

August 29, 2001

Novell Confidential

Manual 99a38 July 17, 2001

Load SBCON.

See “Loading SBCON” on page 46.

4 Select Main Menu > Job Administration > Restore.

The Restore Options screen appears.

5 Select Target Service and then the NetWare server running your backup

and restore Target Services Agent.

This is the name of the server or workstation on which you want to restore

your data. Before selecting it, you must load the correct TSA. See

“Loading the Target Service Agents” on page 45.

If you do not see the target you want on the list, check for these possible

causes:

 The proper TSA is not loaded on the target.

 Network traffic is heavy. In these circumstances, it might take

SBCON a few moments to detect all the targets. Press Esc to return

to the Main Menu, and then press Enter again. Your target should

now be listed. From the Target Services list, select a target.

If the target you select has more than one TSA loaded, SBCON shows

you a list of their full names in the Backup/Restore Target Services on

This Server.

NOTE: When you are trying to connect to a different server, SBCON uses the

same username and password you gave the first time. It prompts only if it fails.

The following table lists the target services and their associated datasets.

Target Service to Restore Dataset to Select

Cluster-enabled pool The cluster-enabled pool that you backed up

File system The server whose file system you want to restore

eDirectory database The server with TSANDS loaded