User Guide
96 Storage Management Services Administration Guide
Storage Management Services Administration Guide
103-000134-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
4
Double-click the preferred queue.
5 Double-click Servers.
6 Right-click the preferred server.
7 Select Error Report.
Creating Log and Error Files
If you do not know what is on the media, or you have lost or deleted the log
and error files, you can re-create them.
Ensure that you have met the prerequisites detailed in “Prerequisites for
SBCON Tasks” on page 81.
To create a log or error file, see “Creating Session Files” on page 98.
Setting the Location of Backup Log and Error Files
Every time you do a backup, you are required to set a location (or directory
path) for the log and error files. The restore log and error files are always
located in the directory, SYS:SYSTEM/TSA/RESTORE.
You can set the location when requested in the backup procedures, or you can
use the following method prior to beginning the backup procedures.
Ensure that you have met the prerequisites detailed in “Prerequisites for
SBCON Tasks” on page 81.
1 From the SBCON Main Menu, select Log File Administration > Set
Location of Log and Error Files.
2 Set the location using one or more of the following methods:
Press Enter to accept the default location, and then press Esc to return
to the Main Menu.
Press Insert to select from a list of network directories, select a
directory, and press Esc twice to return to the Main Menu.
Press Backspace over the path shown (or a portion of the path), type
a new directory or path, press Enter, and then press Esc to return to
the Main Menu.
You can also press Insert during this process to select existing parts
of the path from a list.
3 Press Esc when finished to return to the Main Menu.