User Guide

92 NetWare 6 Readme
NetWare 6 Readme
103-000171-001
October 25, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Load Balancing
Load balancing might not work when all the clients’ IP address are
mapped to a single server NIC and all the clients start data transfer
simultaneously.
Multihoming might not work in some cases where the hosts are
supernetted.
Viewing Bindings
You can discover and load drivers using NWCONFIG and subsequently bind
the boards to IP addresses through INETCFG. However, NWCONFIG does
not show the bindings. To see the drivers, unload the drivers from the system
console and reinitialize the system. NWCONFIG then shows the bindings
added through INETCFG.
Routing
EGP and OSPF are not completely functional in this release.
RAM
Ensure that at least 512 MB of RAM is available where the server is to be
stressed with heavy network operations.
IP Trace
Once the IP Trace is loaded, you cannot load anything from the console until
the Trace finishes. To load something, close the Trace screen.
Application Dependency
If the IP address used by an application is changed, it might stop working. For
more information, refer to the documentation for the particular application.