User Guide

46 Storage Management Services Administration Guide
Storage Management Services Administration Guide
103-000134-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
 Loading the files when the server starts. Place the commands in the
server's STARTUP.NCF, and in the workstation's NET.CFG file,
AUTOEXEC.BAT file (for DOS), or Startup folder (for OS/2).
Loading SBCON
You can load SBCON from the server command line.
If you use NWBACK32 on a client, you do not need to load SBCON.
1 At the server console, enter
SMSSTART
TSA600.NLM, TSAPROXY.NLM, and SMDR.NLM modules are
loaded with default configuration values.
SBSC.NLM, QMAN.NLM, SMSDI.NLM and TSANDS.NLM must be
manually loaded on need basis; SBSC.NLM, QMAN.NLM,
SMSDI.NLM when storage devices are used, and TSANDS.NLM for
backup and restore of eDirectory.
2 Load SBCON by entering
LOAD SBCON
Prerequisites
 Controller and storage device drivers are loaded on the server.
See “Loading Controller and Storage Device Drivers on the Server” on
page 44.
 SMDR.NLM, TSA600.NLM, SMSDI.NLM, QMAN.NLM, SME.NLM,
SBSC.NLM, and SBCON.NLM are installed on the server.
They should have been installed automatically during NetWare 6
installation.
 Each NLM
TM
listed above is in the search path.
 TSA is loaded on each machine to be backed up.
See “Loading the Target Service Agents” on page 45.