User Guide

50 Storage Management Services Administration Guide
Storage Management Services Administration Guide
103-000134-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
 Ensure that media is inserted into your storage device.
You can back up your data two ways: from a server using SBCON or from a
Windows workstation using NWBACK32.
Backing Up from the Server
When you back up your data from one server to a target server or workstation,
you should use the command line.
1 Load the SBCON modules.
See “Loading SBCON” on page 46.
2 Click Main Menu > Job Administration > Backup.
3 Click Target Service to select the NetWare server running your backup or
restore Target Service Agent.
To be able to select the server, you need to load the correct Target Service
Agent (TSA). See “Loading the Target Service Agents” on page 45.
If you do not see the target you want on the list, check for these possible
causes:
 The correct Target Service Agent is not loaded on either the host or
the target. See “Server Console Commands for Backup and Restore
of Various Target Services” on page 45 for LOAD commands.
 Network traffic is heavy. Press Esc to return to the Main Menu, and
then press Enter again. Your target should now be listed.