Operation Manual

Camden User Guide V7
Copyright  2013 novero. All rights reserved.
4.
4.4.
4. HOW T
HOW THOW T
HOW TO USE
O USEO USE
O USE
4.1
4.14.1
4.1 Charging
Charging Charging
Charging Camden
CamdenCamden
Camden
Your Camden comes with a built-in rechargeable battery. Prior to using it for the first
time, it is recommended to completely charge the battery.
When the headset is in low power status, the red LED flashes twice and the headset
emits three tones every 20 seconds. Please recharge the battery of the headset.
Connect the provided charging cable to a computer or laptop USB port. The red LED is
on while charging. It takes about 2.5 hours to charge the battery. When charging is
completed, the red LED is switched off.
Note
NoteNote
Note While charging, the Camden switches off and cuts the existing Bluetooth
connections to your music player and mobile phone. Fur further use while
charging , please turn it back on again with a long key press on the MFB. The
LED continuously shines red and flashes blue twice every 3 seconds. Music -
streaming while charging will increase the charging time.
4.2
4.24.2
4.2 Wearing
Wearing Wearing
Wearing the headset
the headsetthe headset
the headset
The headband of your Camden is foldable and retractable; please adjust according to the
actual use. The letter “L” of the headset represents left ear, the letter “R” of the headset
represents right ear. Please wear your headset accordingly.
4.3
4.34.3
4.3 NFC easy pairing
NFC easy pairingNFC easy pairing
NFC easy pairing
Some new smartphones support easy pairing via NFC. If you like to pair via NFC please
follow these steps:
1. Power up the headset with a press on the MFB
2. Activate NFC on your mobile device
3. Touch the NFC sign on your headset with the NFC sign on your device
4. Follow the instructions on your phone
Note: As there are only a few devices with NFC today, the procedure can be different.
Some devices pair directly some other just goes into pairing mode and request the
button press of the user. Some others only show that they have found a Bluetooth
device. If “NFC easy pairing” does not work with your Phone please go to the next step
and pair manually.