Operation Manual

Camden User Guide V7
Copyright  2013 novero. All rights reserved.
4.5
4.54.5
4.5 Turning on/off
Turning on/off Turning on/off
Turning on/off Camden
CamdenCamden
Camden
Function
FunctionFunction
Function Operation
OperationOperation
Operation LED indicator
LED indicatorLED indicator
LED indicator Indication tone
Indication toneIndication tone
Indication tone
Turning on
Pre
ss and hold
MFB
MFBMFB
MFB
button
for 3 to 5 seconds until blue
LED flashes
Blue LED is on for 1
second
A long “beep”
tone
Turning off
Press and hold
MFB
MFB MFB
MFB
button
for 3 to 5 seconds until red
LED flashes
Red LED is on for 1
second
A long “beep”
tone
Note
NoteNote
Note In order to save power, the headset will automatically turn off if no device can
be connected after 5 minutes.
Every time your Camden is turned on, it will automatically connect to the last connected
device (s). When the headset is in standby mode and not connected to any device, please
press shortly the MFB button twice to connect to the last device(s).
Note
NoteNote
Note _
__
_ The headset only automatically re-connects to the last connected HFP device.
_
__
_ Before connecting to a Bluetooth device, please turn on the Bluetooth
function of the device.
_
__
_ With some Bluetooth phones, you have to allow automatic connecting in the
mobile phone’s Bluetooth settings. Please refer to your mobile phone’s user
manual for further information.