Operation Manual

multipoint
With multipoint, you can pair and connect Lexington
with two mobile devices at the same time.
Use one phone as primary device with all advanced
call functions available, and another as secondary
device with basic call options.
• To assign the primary status to a specific device,
make sure to connect this device to your headset
first. The order in which two devices were paired
with your headset is irrelevant.
• To switch the primary status from one device to
another, press volume up and volume down (••/•) at
the same time. – If you make an outgoing call from
the secondary device, this will also change its status
to primary device.
• To answer a call waiting (only available from the
inactive device, and only if supported by both the
primary and secondary devices), press the multi-
function button once to put the active call on hold
and answer the call waiting. – With a touch of the
multi-function button on the Lexington headset,
multipoint will switch the device so you can answer
the call.
welcome
Lexington
getting started
how to ...
signals
care
support
safety & disposal
certification &
safety approvals
glossary
back