Operation Manual

support
Go through the list of suggestions below if you
experience any inconvenience with Lexington.
• If there is no sound in your headset:
– Check that the volume is adjusted correctly.
– Check that your headset is paired with your device.
– Check that your headset and device are turned on.
You should then hear a sound from your headset.
– Check that your headset and device are charged.
• If you cannot pair your headset:
– Check that the headset is not already paired with
your device. If not, then repeat the pairing
procedure, or press and hold (2 sec) the multi-
function button and volume down (•) at the same
time to reset the list of paired devices.
• If you hear static or noise in your headset:
– Check that the headset is close to your mobile
device. If not, move the headset closer to the
device.
• If you cannot redial, voice-dial, place a call on
hold or reject a call through your headset:
– Check that these features are supported by the
connected mobile device.
– Check that the mobile device is connected to your
headset as primary device.
For software updates and more support, please visit us
at www.novero.com
technical specifications
_read more
welcome
Lexington
getting started
how to ...
signals
care
support
safety & disposal
certification &
safety approvals
glossary
back