Operation Manual

Rockdale user guide v1.0 9 (18)
Copyright  2012 novero. All rights reserved.
4.4
4.44.4
4.4 Turning on/off
Turning on/off Turning on/off
Turning on/off Rockdale
RockdaleRockdale
Rockdale
Function
FunctionFunction
Function Operation
OperationOperation
Operation LED indicator
LED indicatorLED indicator
LED indicator Indication tone
Indication toneIndication tone
Indication tone
Turning on Press and hold MFB
MFBMFB
MFB button
for 3 to 5 seconds until blue
LED flashes
Blue LED is on for 1
second
A long “beep”
tone
Turning off Press and hold MFB
MFB MFB
MFB button
for 3 to 5 seconds until red
LED flashes
Red LED is on for 1
second
A long “beep”
tone
Note
NoteNote
Note In order to save power, the headset will automatically turn off if no device can
be connected after 5 minutes.
Every time your Rockdale is turned on, it will automatically connect to the last
connected device. When the headset is in standby mode and doesn’t connect to any
device, short press MFB button twice, it will automatically connect to the last connected
device.
Note
NoteNote
Note _
__
_ The headset only automatically re-connects to the last connected HFP device.
_
__
_ Before connecting to a Bluetooth device, please turn on the Bluetooth
function of the device.
_
__
_ With some Bluetooth phones, you have to allow automatic connecting in the
mobile phone’s Bluetooth settings. Please refer to your mobile phone’s user
manual for further information.