Operation Manual

novero Tour us
er guide
v
1.1
10
(
19
)
Copyright  2011 novero. All rights reserved.
5.4
5.45.4
5.4 Turning on/off
Turning on/off Turning on/off
Turning on/off novero Tour
novero Tournovero Tour
novero Tour
Function
FunctionFunction
Function Operation
OperationOperation
Operation LED indicator
LED indicatorLED indicator
LED indicator Indication tone
Indication toneIndication tone
Indication tone
Turning on
Press and hold
MFB
MFBMFB
MFB
button
for 3 to 5 seconds until blue
LED flashes
Blue LED is on for 1
second
A long “beep”
tone
Turning off
Press and hold
MFB
MFB MFB
MFB
button
for 3 to 5 seconds until red
LED flashes
Red LED is on for 1
second
A long “beep”
tone
Note
NoteNote
Note In order to save power, the headset will automatically turn off if no device can
be connected after 5 minutes.
Every time novero Tour is turned on, it will automatically connect to the last connected
device. When the headset is in standby mode and doesn’t connect to any device, short
press MFB button twice, it will automatically connect to the last connected device.
Note
NoteNote
Note _
__
_ The headset only automatically re-connects to the last connected HFP device.
_
__
_ Before-connecting to a Bluetooth device, please turn on the Bluetooth
function of the device.
_
__
_ With some Bluetooth phones, you have to allow automatic connecting in the
mobile phone’s Bluetooth settings. Please refer to your mobile phone’s user
manual for further information.