Operation Manual

novero Tour us
er guide
v
1.1
16
(
19
)
Copyright  2011 novero. All rights reserved.
8.
8.8.
8. TECHNICAL
TECHNICAL TECHNICAL
TECHNICAL S
SS
SPECIFICATIONS
PECIFICATIONSPECIFICATIONS
PECIFICATIONS
Bluetooth specification
Bluetooth specificationBluetooth specification
Bluetooth specification
Bluetooth V2.1+EDR
Bluetooth profiles
Bluetooth profilesBluetooth profiles
Bluetooth profiles
HSP
v1.1
, HFP
v1.5
, A2DP
v1.2
and AVRCP
v1.0
Operating
Operating Operating
Operating
distance
distancedistance
distance
10 meters, Class II
Battery
BatteryBattery
Battery
Built
-
in, rechargeable Li
-
Ion battery
Working time
Working timeWorking time
Working time
s
ss
s
Music: Up to 5 hours
Talk: Up to 6 hours
Standby time
Standby timeStandby time
Standby time
Up to 120 hours
Charging input voltage
Charging input voltageCharging input voltage
Charging input voltage
DC +5.0±0.25 V
Charging time
Charging timeCharging time
Charging time
Approx. 2
.5
hours
Dimensions
DimensionsDimensions
Dimensions
158
×
148
×
26
mm
Weight
WeightWeight
Weight
Approx
.
40 g
9.
9.9.
9. GLOSSARY
GLOSSARYGLOSSARY
GLOSSARY
Bluetooth
BluetoothBluetooth
Bluetooth is a radio technology that connects devices, such as mobile phones and
headsets, without wires or cords over a short distance (approx. 10 meters/33 feet).
Bluetooth is safe to use and secure, too. Once two Bluetooth devices have been paired,
no one can listen in and no other Bluetooth devices can interfere.
Get more information at www.bluetooth.com
Bluetooth profiles
Bluetooth profilesBluetooth profiles
Bluetooth profiles are the different ways that Bluetooth devices communicate with
other devices. Bluetooth phones support the headset profile, the handsfree profile or
both. In order to support a certain profile, a phone manufacturer must implement
certain mandatory features within the software of the phone.
Idle (not paired)
Idle (not paired)Idle (not paired)
Idle (not paired) is the mode where your headset is turned on but not paired to a
Bluetooth-enabled mobile phone.
LED
LEDLED
LED is short for light-emitting diode and refers to the light indicator of your headset that
sends different red or blue signals depending on specific actions, events or modes.
Multipoint
MultipointMultipoint
Multipoint allows you to pair and connect your headset to two mobile devices at the
same time, and use one device as primary device with all regular options available and
the other as secondary device with restricted options.
Pairing
PairingPairing
Pairing creates a unique and encrypted connection between two Bluetooth devices.
Bluetooth devices will not work together if they have not been paired.
Password
PasswordPassword
Password or PIN
or PINor PIN
or PIN is the code required to pair a Bluetooth device (e.g. a mobile phone)
with your headset.
Standby
StandbyStandby
Standby is the mode where your headset is turned on, paired and ready for outgoing or
incoming calls. When a call is ended, the headset automatically returns to standby mode.