Use and Care Manual

Installation:
1. Before use and mounting,
place the light set on a clean,
at surface and check for any
damage to the LED lights,
connections, supply cord or
plug.
2. Never use sharp or pointed
objects to install / mount a
string light set or chain.
3. Fixing with metal or braided
wire, or similar devices is not
advisable. Metal or braided
wire can damage the insulation
layers of the light set.
4. Suitable installation devices
include cable conduits or
soft cable ties. When using
cable ties, ensure they are not
excessively tightened to the
string to avoid damage to the
insulation layers of the light
set.
5. The supply cord and rope body
must not be subject to push,
pull or torsion forces.
6. If you have attached
extensions, ensure a proper
and secure connection
between them and the main
supply cord.
7. When connecting additional
lights to a set, make sure
the set is not plugged-in and
powered.
8. Ensure that the light strings
and supply cord are not
located in or near running
water or drains (e.g. snow,
streams, rain gutters).
9. If the light set does not work,
have it checked by a certied
technician.
Instructions for Use
Once the light set is properly
mounted, plug it into the
appropriate electrical outlet to
power ON.
10ct Edison and Globe String Lights
Thank you for purchasing our Novolink Outdoor String Lights!
To insure proper installation and prior to use, please read these
instructions and all warnings thoroughly.
Need Extensions or additional String Lights?
www.shopNovolink.com

Summary of content (2 pages)