Operation Manual

5756
NOXON A110+
5.7.2 Now playing information
While the stream is playing, the screen shows its frequency, or if RDS information is available,
station name and any further RDS information such as programme name, track title and contact
details. If no information is available, just the frequency is shown. Stereo broadcasts are indicated
with an icon at the top of the screen, To view further information about the broadcast, press INFO.
Each time you press INFO, another set of information is displayed, cycling through RDS text,
further RDS text (station/programme type), frequency and today’s date.
5.7.3 Settings
Scan settings
By default, FM scans stop at any available station. This
may result in a poor signal-to-noise ratio (hiss) from weak
stations. To change the scan settings to stop only at stations
with good signal strength, select Yes after choosing Strong
station only?
Audio settings
All stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-to-
noise ratio (hiss). To play weak stations in mono, select FM weak reception: Listen in mono only
and then YES.
5.8 Bluetooth
When entering Bluetooth mode and there is no device conencted recently, the NOXON device
enteres a discoverable Bluetooth pairing mode. Now the device is selectable on your audio source
device (e.g. your smartphone). After these devices are coupled, you can playback audio through
the A110+ device. For further information on coupeling bluetooth devices, please refer to the sour-
ce devices‘ manual (e.g. smartphone).
5.9 Sleep
To set the sleep timer, select Sleep under Main menu or press Sleep Button on
on the remote control. Choose from Sleep OFF, 15 MINS, 30 MINS, 45 MINS or 60 MINS.
Once you select a sleep period, the system returns to the main menu.