Operation Manual
4140
NOXON iRadio
Enter WEP or WPA code to connect the WiFi.
If it is accidentally pressed > to move a redundant entry, rotate the reel until the screen
shows the entry being blank and then press Select to continue. The system will automa-
tically remove the last blank entry.
• Wireless Network (WPS PBC)
If you are using a router with WPS/QSS button, you may set up the network connection
simple via WPS function. Enter it and go to press the WPS/QSS button on your router
within 120 seconds. The connection between the router and NOXON iRadio will then be
congured automatically.
Manual Conguration
You can choose DHPC (which IP assig-
ned automatically) or manually input IP
address for wireless network connection.
When you Select manual setting for wired
connection, the followings have to be en-
tered:
1. SSID (the name of Access Point);
2. IP Address;
3. Subnet Mask;
4. Default Gateway;
5. Preferred DNS Server;
6. Alternate DNS Server.
You may choose (Manage) specic network if you have setup more than one network
connection within an area.
Check Network when Power On
Enable / disable WiFi network.
When you enable the WiFi network, the system will automatically search the available
AP. Select you required AP.
Enter WEP or WPA code to connect the WiFi.
If the wireless network connection is not existed or failed, the icon at the top left corner
will have a cross on it.