Technical data

4544
NOXON iRadio 300 / 360
1. POWER switch: This should be self-explanatory ;).
2. POWER: Connect the provided power cable to this jack.
3. LAN: For wired network operation, use this RJ45 jack.
4. LINE OUT: You can connect this 3.5 mm stereo jack to an amplier or active spea-
kers. When this jack is occupied, the internal speakers are muted.
5. HEADPHONE: Here, you can connect your headphones if you want to have the
sound of the iRadio 300 all to yourself. If the headphones are connected, the internal
speakers are muted.
6. SPEAKER OUT: You can connect a second speaker here. If a speaker is plugged
into the socket, the device switches to stereo mode automatically. For the NO-
XON iRadio 360, the additional speaker is included in the scope of delivery; for
the NOXON iRadio 300, the speakers are available for purchase as options in the
TERRATEC Webshop (http://webshop.terratecshop.net/shop/).
7. WLAN antenna: For wireless reception, you have to connect the WLAN antenna
provided here.
* Attention: Please note that a second speaker only should be connected to the
SPEAKER OUT when the device is switched off to ensure a smooth-
function without any fault.