Operation Manual

NOXON iRadio Cube
10 ENGLISH
2.6 The analogue audio output ("AUDIO Out")
The Audio output on the back of the device is intended to be con-
nected to the Audio / Line input of a HiFi amplifier or a pair of active
speakers (speakers with built-in amplifiers). The output is designed
for a voltage level of 2.2 VRMS. Before making the audio connection
to your amplifier, please make sure the volume is at a suitable level to
prevent damage to your hardware or your ears.
2.7 The Reset button ("RESET")
Press this button of the NOXON to do a reset. If the NOXON ever
freezes unexpectedly, use this button to reboot the device.
To reset the device to its factory defaults—which will also perma-
nently clear all settings such as network keys—switch the device on
and press the reset button for at least 20 seconds before releasing it
again. Then the NOXON restarts and it will be back in its original
state. It will be necessary to run the installation procedure again at
this point.
Before making such a drastic move, try a soft reset first: press and hold the POWER button on the remote
control for several seconds to trigger the soft reset.