Operation Manual

NOXON iRadio Cube
ENGLISH 35
8.7 Your new FM radio
The iRadio Cube is also equipped with a classic integrated FM radio.
Preparation
First make sure that your iRadio is connected to an antenna, otherwise the only thing you'll receive is a
rather seductive hissing sound. This can either be the accompanying dipole antenna or a house antenna
(coaxial, 75 ohm). As soon as the antenna is connected, select the "FM Radio" item in the main menu
( ).
Operation
When you navigate in the FM Radio menu for the first time, select the
"Stations" item. You will be informed that a station lists has not yet
been saved, and asked whether you want to create a station list.
Always confirm with the Right button, and the iRadio will automati-
cally start searching for available stations immediately. From now on,
you can access your station list at any time via the "Stations" menu
item.
To refresh your station list, go to "Auto Search" in the FM Radio
menu. There, you will be asked if you want to begin a new search and
delete the old station list. Press the Right button to confirm, and your
new station list will be created.
If you want to add a station manually, or edit your existing station list,
of course that's easy too. The items "Manual Search" and "Edit List"
provide the help you need.
To add a station to your list manually, select the "Manual Search"
item in the FM Radio menu. Now you can set the frequency you want
using the two SKIP buttons and
.
Press the Right button to
save this frequency.
Use the "Edit List" menu item to change the frequency of the selected
station, delete the station, or delete the entire list (using the keys as
described above for "Search manually").
Also: If available from previously listened-to stations, the sender information is loaded via the RDS signal
and is displayed as the station name the next time you call up the station list.