Operation Manual

6564
NOXON iRadio M110+
Internet radio: Quick start
This Quick Start Guide shows you how to get started using your NOXON device. For
detaileddescriptionsandspecialcongurations,refertotheinformationfurtherbackin
your manual (depending on the scope of delivery, available in printed form or on the ac-
companying CD and online at www.noxonradio.com).
Pretest
Like any network device, your NOXON needs to be connected to your network before
you can get started.
What do you need?
• AfastInternetconnection(forexample,DSL,ideallywithaatrate).
• A router for Internet access; for wireless operation, what is called a WLAN (Wireless
LAN) router
• A network cable, if you do not want a wireless Internet connection for your device
• For WLAN integration: your network key (WEP, WPA or WPA2)
This key, just like any key, protects your network from unauthorised access and was
generated when your network was set up. To allow NOXON access to a key-protected
network, you will need to enter the network key into NOXON in a later step. If your net-
work does not have a key, the NOXON can connect to the Internet without a network key.
Note: If you are not sure whether you are using a key of this type in your network, just
give it a try without entering anything! If this does not work, repeat the setup process from
the beginning. However, you will need to know your network key at this point. Please ask
the person who set up your network for assistance.
Setup
Once your iRadio has been activated initially, follow these steps to link it to your network
forthersttime:
You are greeted by the setup wizard, which asks politely if you want to start it up.
Setup wizard
Start now?
YES NO
Use the navigation dial to select a language for
themenuandconrm–asinallothermenus–
the selection by pressing the navigation dial.
Then, enter the time format (12/24 hour).