Operation Manual

Italiano Francais DeutschEnglish

Control Panel

1. Scan starts scanning available stations

2. DAB/FM switches from DAB+/DAB to FM mode and vice versa

3. Info (i) shows additional information Journaline (if broadcasted by station)

4. Mute reduces the volume to 0

5. On/Off activates or deactivates your Radio (Standby)

6. Memory saves and recalls your favourite stations

Battery Installation

• Open the battery compartment located at the bottom.

• Gently press the battery connector into the corresponding socket.

• The tongue of the connector slides into the groove of the socket.

• Place the battery plainly into its compartment.

• Close the cover of the battery compartment.

Connection The connection of your Radio is really easy:

• Start by connecting the provided mains cable with the mains connector (6) on the unit

and a power outlet.

• Proceed by inserting the provided telescopic antenna into its dedicated connector (9)

and extend it to its full length.

• Alternatively, you can also use a DAB active antenna or a signal coming from your

rooftop antenna. In this case, please use the provided adapter.

• Set the mains switch (5) into the “I” position. In order to activate or deactivate the

Radio, just press the On/Off button (14) on the control panel located on top of the unit.

Operation Receiving DAB+/DAB stations

Switch into DAB+/DAB mode

The upper left corner of the display shows the mode your Radio is currently set to (FM,

DAB or Menu). If it is not set to DAB+/DAB already, just press the DAB/FM button (11)

on the control panel once.