Setup guide

2524
SW Version
This shows the software version running on your device.
Factory Reset
Should you decide to reset your Radio to its default settings, you can do this here.
Attention: This will delete all of your settings and saved stations!
Firmware Update
An essential part of our corporate philosophy is the constant improvement of
our devices. For this reason we have provided the Radio with an USB port.
This USB port is solely responsible for the rmware/software update, therefore it is not
capable of transferring any other data.
Preparation
Please visit the following website:
http://www.terratec.net/en/drivers-and-support.html
and choose the NOXON Journaline Mobile as your product.
Download the latest rmware and unpack it into the main directory of your USB stick
(not into a subfolder). It is also important that the USB stick is formatted in FAT32 format.
Other formats are not supported by the Radio.
It is possible that the device is automatically reset to its factory settings on a rmware
update. This means your individual settings will get lost. We apologize for this, but this is
partly necessary to really update the full functionality of the device.
Flash process
1. Turn off the device with the power switch on the rear panel (do not switch the device
into standby).
2. Insert the prepared USB stick into the USB port on the rear panel.
3. Press the SCAN button, keep holding it down, and then turn on the device.
4. A progress bar will display the ash process now.
This process should not be interrupted under any circumstances. Do not power
off the device or unplug the USB stick during the update process since this would
irreversible destroy the device.