Operation Manual
5958
NOXON NOVA M
5.6 DAB
DAB mode recives DAB/DAB+ digital radio and dsiplay information about station, stream and track
playing.
5.6.1 Scanning for stations
The rst time you select DAB radio mode, or if the station
list is empty, NOXON NOVA M automatically performs a full
scan to see what stations are available. You may also need
to start a scan manually to update the list of stations for one
of the following reasons:
• Available stations change from time to time.
• If reception was not good for the original scan, this may result in an empty or incomplete list
of available stations.
• If you have poor reception of some stations (burbling), you may wish to list only stations with
good signal strength.
To start a scan manually, choose Full scan. To scan only stations with good signal strength, select
Local scan.
Once the scan is complete, the radio shows a list of
available stations. To remove stations that are listed but not
unavailable, choose Prune invalid.
Turn the navigate reel to view a list of stations and press
to select. Once selected, the station plays and the screen
shows information about station, track or show as broad-
cast.
5.6.2 Presets
To store a DAB preset, press and hold PRESET until the display shows the Save preset screen.
Select one of the 5 presets to save the currently playing station.
To select a preset, press PRESET briey, then select one of the listed preset stations. When
a preset station is playing, it shows Pn (P1, P2 etc) at the bottom right of the screen.
“1” to “0” on the remote control are for the use of preset station 1-5.