MODEL:NF-818 Your excellent helper in cable test! INSTRUCTION MANUAL Monitoring Cable Finder ORIGINAL AUTHENTIC Patented products, rfeiting not allowed Counte REV1.
Your excellent helper in cable test!
Contents Main Functions and features....................................1 interfaces and functions...........................................2 Description of product...........................................................3 Product features ...................................................................3 Volume adjusting function.....................................................3 Earphone function ....................................................4 BNC LINE Tracing function .....................
Main Functions and features ● Break the defect of the poor anti-interference and loud noise . ● Capable of avoiding the interference of strong current , daylight lamp , indicator and other charged devices. ● To quickly find the target wire or cable among the plenty of BNC cable, monitoring line and other various kinds of wires. ● To perform cable tracking on video and monitors with power-on. ● To sequence the BNC line and monitoring line.
interfaces and functions Wire tracer for BNC and monitoring cables Parts of emitter Parts of receiver Probe BNC connector Signal indicator Wire finding indicator Function switchover button Wire sequence indicator Wire sequence signal indicator Inching button Wire sequence indicator BNC connector Coaxial clip cable Wire tracking button —您 的 test! 布线专家! Your excellent helper in cable Earphone jack Volume 02
Description of product NF-818 Wire tracker for BNC and monitoring cables is our latest product. It is designed to trace coaxial cable, metal lines ,and single conducting wire to test the status of the cables , identify wire fault . Thus, it is widely used in the field of cabling and maintenance for coaxial cabl and monitoring cable. Product features ● Break the defect of the poor anti-interference and loud noise .
Earphone function In noisy environment , earphone can be used to prevent interference from the outside. BNC LINE Finding function Wire Tracing Push the button to“SCAN”and the“STATUS” indicator will light, which indicates the emitter is working. Insert one end of the BNC line into the BNC port, or clamp the naked copper core with the red crocodile clip the black crocodile clip is grounded. Then trace the target wire among a lot of wires with the receiver.
Ⅰ CASE Hunt the target wire with the receiver on the other end CASE Ⅱ Connect the emitter with the BNC connector Connect the crocodile clip of the emitter with the naked cable. Then compare the voice of “tick” and the one which has the loudest voice is the target wire.
BNC LINE Sorting function s es ne Liin CL NC B BN Attention: Do not allow to use this device with strong current wires 1.Insert the two of the BNC connectors to the corresponding interface of the emitter and receiver respectively. 2.Push the Function switch over button of emitter to “TEST”, the wire sequence indicator will light, which indicates the emitter is working. 3.Judge the short circuit, open circuit, cross according to the 4 indicators; 4.
Application users Application scope Telecom bureau/net bar/telecom engineering companies/network engineering companies/power supply/army and other department requiring wire. Wire engineering of telecom, network and regular maintenance work; network line engineering of computer; other wire engineering and maintenance.
NF-306 NF-868 NF-8208 NF-268 NF-806R NF-816 NF-468L NF-3468 NF8108-M NF-388 NF-903 NF-906A Your excellent helper in cable test! 08
Your excellent helper in cable test! SHENZHEN NOYAFA ELECTRONIC CO.