Specifications
is easy as 1, 2, 3….
1. Assemble Frame
Align frame modules to have
NOYO logo below top dowel
Use Allen Screws ™
To screw modules together
Frame can easily be disassembled for storage, transport or
adding/removing modules to change head board size.
2. Mount Frame
Hardware for 2 types of wall mounting is provided:
• 3
1/16
x4” Toggle bolts for drywall
• 3” Steel wood screws for wooden walls and/or
screwing into 2x4 wooden studs
Find best place to place wall brackets above bed.
Remember that you can slide headboard horizontally into
place.
Just make sure you level brackets above bed at desired
height.
Mount wall brackets with
hardware provided.
Pull pad and slipcover over head board.
Hang head board onto wall brackets and slide horizontally
into desired place.
3. Care for your head board
NOYO Cedar wood frame wipes off with a damp cloth
NOYO Pad:
• Hypoallergenic, all new material consisting of Cotton/
Polyester fabric with 100% Polyester fill
• Machine wash, warm water, mild detergent
• Tumble dry, low heat, or line dry
NOYO Slipcover:
• Hypoallergenic, 100% Polyester, Water based ink
• Recommended wash before use: machine warm wash,
gentle cycle with like colors, remove promptly.
• No bleach
• Tumble dry low or line dry
• Warm iron as needed
What you need: #2 Philips head screw driver
What is provided: 2-8 Allen Screws™, 1 Allen Key ™, 4 Steel Wood Screws, 4 Toggle Bolts