User's Manual

3
1. Caution and safety instructions
Please, read this User Manual carefully before using the product. Keep the
user manual in a safe place to future advice.
• There are high voltage areas inside this equipment that may injury people.
Therefore, please do not open the product on any account. In case of any tech-
nical failure, please get in contact with our technical service.
In order to avoid either an accidental fire or electric shock, please do not
place the product under the rain or in moist zones.
• This device uses a laser system. To prevent a direct exposure to the laser
beam, please neither open the product nor stare at laser beam.
• In case of being necessary any technical maintenance, please contact with
our technical service.
This product has been tested according to the B-Class of digital devices and
it meets all the CE specifications.
• If the cable is damaged, it must be repaired by the manufacturer, the after
sales service agent or similarly qualified person to avoi danger.
1.1 Caution
It is very important to read attentively and follow out the instructions of this
user manual. Keep the manual for future consultation.
Do not place the unit on uneven surfaces because the player may fall to the
ground and suffer a breakdown or damage to people or pets.
• Disconnect the product from the mains before cleaning it. Do not use clea-
ning liquid or sprays. Use only a moist cleaning rag.
To avoid possible damage to equipment, please unplug it, when it is not going
to be used for a long time or in case of storms.
Do not introduce any object into the product by means of the ventilation
slots since it could cause a short-circuit and start a fire. Do not pour liquids
on the DVD player
• The mains socket must be close to the equipment and be easily accessible.
Do not either step on the powering cable or place objects on it.
To avoid interferences, the active devices such as TV amplifiers, Home The-
ater Systems, ... must be kept away from the unit.
The powering supply of this product is, AC 110-240V ~ 50/60Hz. Do not
use any other power source.
Do not either obstruct the ventilation slots or place the device near heating
sources.
- Children should be monitored to make sure they do not use the device as a
toy.
1.2 Safety instructions
ENGLISH