User guide

Note: The off cycle is programmable from 1 second

to 23 hours, 59 minutes and 59 seconds. The control

will not allow an off cycle of 0:00.00. A duty cycle

event will always start with the off cycle.

Press the PROGRAM key to go to next mode.

3.0 ASTR MODE

The Astro (astronomic) function provides a means for

controlling lights based on the changing sunrise and

sunset times throughout the year without use of a photo

control. The Astro feature does not turn loads on or off.

Between sunrise and sunset the load(s) are not allowed

to be on. An event must be programmed to allow the

load(s) assigned to Astro to turn ON (see section 4.0.)

Press the PROGRAM key to bypass and go to next

mode.

Press the NEXT key to go to the ﬁrst setting.

3.1 SET ASTRO TIMES

Look up today’s sunrise and sunset times before starting.

Also, to determine your location latitude use the map

below.

Note: Offset Feature - program today’s sunrise/sunset

times with the desired offset ﬁgured in. The control will

automatically update the sunrise/sunset times each

day. The allowable ranges are 10 - 70 North and 10 -

70 South.

Use the + and - keys to modify the ﬂashing item.

Use the NEXT key advance to the next ﬂashing item.

Program RISE (sunrise) hour and minutes and SET

(sunset) hour and minutes.

Program LATT (latitude).

Assign Astro function to each channel using the + and -

keys to select YES for the ﬂashing channel number.