User guide

Program hours, minutes, or seconds.

For ﬂashing channel number, use the + and - keys and

show YES to select the channel the input will affect.

Press the NEXT key to advance to the next channel for

same choice.

• OVr (Toggle override with or without delay) next

screen is used for setting the on time when the input

is conﬁgured as an OVr (toggle) override type.

The on time is programmable from 0 seconds to 23

hours, 59 minutes and 59 seconds. When this on

time is set to 0:00.00, the override functions as a

toggle on/toggle off override. When a non-zero value

is programmed, the override functions as a timed on/

toggle off override.

Select OVr.

Program hours, minutes, or seconds if desired.

For ﬂashing channel number, use the + and - keys and

show YES to select the channel the input will affect.

Press the NEXT key to advance to the next channel.

• ENb (Enabler input)

Select ENb.

For ﬂashing channel number, use the + and - keys and

show YES to select the channel the input will affect.

Press the NEXT key to advance to the next channel.

• Sensor settings are not assigned to channels and are

used in Sensor Event Mode.

Select sensor type.

NOTE: For TORK EPC-LC light sensor select U

F: Fahrenheit temperature sensor (-40 to 215)

C: Celsius temperature sensor (-40 to 102)

L: Light level sensor (0 to 100)

U: User deﬁned sensor (0 to 255)