User guide

Calibrate to adjust sensor input. Zero is default.

F: -12,-11,-9,-8,-6,-5,-3,-2,0,2,3,5,6,8,9,11

C: -8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7

L: -4,-3,-2,-1,0,1,2,3

U: -8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7

Choose the next input with the + and - keys then the

NEXT key.

Press the PROGRAM key to go to next mode.

6.0 EVENT SENS MODE

Up to 32 sensor events can be programmed. A sensor

event can be assigned to either channel. Each sensor

event can be assigned to any day or combination of

days including the 3 holiday schedules (A, B and C).

A sensor must be conﬁgured in step 5 for this mode to

function. This mode programs the start (ON) for the

sensor event. Set the end (OFF) time in Event Mode

section 4.0.

Press the PROGRAM key to bypass and go to next

mode.

Press the NEXT key to go to the ﬁrst setting.

6.1 SET SENSOR EVENTS

Use the + and - keys to modify the ﬂashing item.

Use the NEXT key advance to the next ﬂashing item.

Choose the event number to program.

Choose the input. (Number and type (F, C, L or U) will

show. If the input is not conﬁgured as a sensor a

question mark (?) is shown.)

Choose the channel number.

Program hours and minutes to start the event.