User guide

7
format.
Use the NEXT key advance.
2.2 SET STAGGER START-UP
Use the NEXT key skip stagger.
Use the + and - keys to modify the flashing NO to the
stagger time.
The following stagger-up selections are available:
NO = not used
00.05 = 5 seconds
00.15 = 15 seconds
00.30 = 30 seconds
01.00 = 1 minute
05.00 = 5 minutes
10.00 = 10 minutes
15.00 = 15 minutes
Note: The selected stagger up time between channels
occurs at scheduled ON events, after a power outage,
and after a status update.
Use the NEXT key advance.
2.3 SET DURATION LENGTH (SIGNAL) AND DUTY
CYCLE
Use the + and - keys to modify the flashing item.
Use the NEXT key advance to the next flashing item.
Program dUR1 (first duration 0:00.01) hour, minutes, or
seconds and continue to set each of the durations
(dUR2 – dUR4.)
Note: These durations are programmable from 1
second to 23 hours, 59 minutes and 59 seconds.
Program dCF1 (first duty cycle OFF time) hours, minutes,
or seconds, then program dCN1 (first duty cycle ON
time) hours, minutes, or seconds to complete the pair.
Continue for each of the duty cycles (dCF2 – dCF4).