Cut Sheet

ManualsBrandsNSI Tork ManualsConnectorsEasy-Splice Gel Stub 2

Splicing

107 NSi

EASY-SPLICE™ WRAP-AROUND GEL / HTAP GEL SPLICE

EASY-SPLICE™ WRAP-AROUND GEL SPLICE KITS

CATALOG UPC SLEEVE CONDUCTOR MAX. CONNECTOR GENERAL USE CARTON NO.

CODE LENGTH SIZE OPENING DIAMETER LENGTH QUANTIT

CATALOG

NO.

UPC

CODE

SLEEVE

LENGTH

CONDUCTOR

SIZE

MAX. CONNECTOR

OPENING

GENERAL USE

DIAMETER LENGTH

CARTON

QTY.

WAGS-4/0-4 01571 4.00 (100) #14 – 4/0 (2 – 95) 1.00 (25) 0.15 – 0.70 (4 – 18) 3

WAGS-4/0-6 01572 6.00 (150) #14 – 4/0 (2 – 95) 3.00 (75) 0.15 – 0.70 (4 – 18) 3

WAGS-4/0-8 01573 8.00 (200) #14 – 4/0 (2 – 95) 5.00 (125) 0.15 – 0.70 (4 – 18) 3

WAGS-4/0-10 01570 10.00 (250) #14 – 4/0 (2 – 95) 7.00 (175) 0.15 – 0.70 (4 – 18) 3

WAGS-500-6 01576 6.00 (150) #6 – 500 (16 – 240) 2.00 (50) 0.40 – 1.30 (10 – 33) 3

WAGS-500-8 01577 8.00 (200) #6 – 500 (16 – 240) 4.00 (100) 0.40 – 1.30 (10 – 33) 3

WAGS-500-10 01574 10.00 (250) #6 – 500 (16 – 240) 6.00 (150) 0.40 – 1.30 (10 – 33) 3

WAGS-500-12 01575 12.00 (300) #6 – 500 (16 – 240) 8.00 (200) 0.40 – 1.30 (10 – 33) 3

WAGS-750-8 01582 8.00 (200) 250 – 750 (120 – 350) 2.00 (50) 0.80 – 1.50 (20 – 38) 3

WAGS-750-10 01583 10.00 (250) 250 – 750 (120 – 350) 4.00 (100) 0.80 – 1.50 (20 – 38) 3

EASY-SPLICE™ H TAP GEL SPLICE COVERS

ESGHS-BG APPROVED CONNECTORS

ESGHS-O APPROVED CONNECTORS

CATALOG

NO.

UPC

CODE

MAIN TAP DIE

CARTON

QUANTITY

ESGHS-BG 16865 #6 - #2 AWG #14 - #8 AWG BG 6

ESGHS-O 16866 #2 – 2/0 awg #14 – #6 AWG O 6

ESGHS-N 16867 350 mcm 4/0 AWG N 3

Blackburn WR139 Burndy YH0-1 Homac 0B22 NSi WR139 T&B 63110

Blackburn WR159 Burndy YH0-2 Homac 0B44 NSi WR159 UTILCO HT1

Blackburn WR179 Burndy YH0 100 Homac 0B102 NSi WR179 UTILCO HT2

Blackburn WR199 Burndy YH0 125 Homac 0B103 NSi WR199

Burndy YH0 150

Blackburn WR9 NSi WR9

Burndy YPC2A8U T&B 63105

Homac UB214

The Easy-Splice

™ low-voltage H-frame closure

insulates and seals low-voltage cable-taps and

and splices made with H-frame compression

connectors. The closure utilizes sealing gel

material to seal and protect the connection from

moisture ingress, corrosion and pollution.

To install, simply place the connection on

the closure and press the closure together. The

low-voltage H-frame closure is ideal for both

underground and overhead applications and is

especially useful for street lighting applications.

Qualiﬁed to ANSI C119.1-1986 for

underground splicing. Rated -40˚C to 90˚C,

1,000 volts, UV resistant.

The Easy-Splice

™ H tap gel splice covers do

not include connector.

Easy-Splice

™ wrap-around gel splice closure

sleeves quickly insulate and seal buried

electrical connections rated up to 1,000 volts.

Engineered to handle direct burial and manhole

applications, these splice enclosure sleeves are

iµÕ>ÞÊÜiÊÃÕÌi`ÊvÀÊÃÕ>ÌÊ>`Ê>ViÌÊ

repair. Simply wrap and snap the sleeve on any

cable in the use range. The sealant gel in the

sleeve seals on contact. The splice closure sleeve

can be applied on all common compression

connectors and low voltage cables, as well as

in-line mechanical connectors.

Qualiﬁed to ANSI C119.1-1986 for

underground splicing.

A minimum seal length is required on each

Ã`iÊvÊÌiÊViVÌÀÊ«i}ÊÀÊ>ViÌÊ`>>}i°Ê

Use these guidelines for minimum seal distance:

WAGS-4/0 series: 1.50” each side

WAGS-500 series: 2.00” each side

WAGS-750 series: 3.00” each side

Summary of content (12 pages)

PAGE 1
Splicing EASY-SPLICE™ WRAP-AROUND GEL / HTAP GEL SPLICE EASY-SPLICE™ WRAP-AROUND GEL SPLICE KITS Easy-Splice™ wrap-around gel splice closure sleeves quickly insulate and seal buried electrical connections rated up to 1,000 volts. Engineered to handle direct burial and manhole applications, these splice enclosure sleeves are iµÕ>ÞÊÜiÊÃÕÌi`ÊvÀÊÃÕ>ÌÊ>`Ê>ViÌÊ repair. Simply wrap and snap the sleeve on any cable in the use range. The sealant gel in the sleeve seals on contact.
PAGE 2
Splicing IN-LINE, GEL TAP SPLICE KITS EASY-SPLICE™ IN-LINE GEL SPLICE KIT (WITH CONNECTOR) The Easy-Splice™ in-line gel splice kit provides a sealed splice for underground, buried and overhead applications. This in-line closure offers a fast and simple method for splicing, insulating and environmentally sealing low voltage cable splices. Simply install the connector on a copper or aluminum cable, place it in the closure, and snap closed. The splice kit is watertight for use in all locations.
PAGE 3
Splicing DIRECT BURIAL SPLICE KITS W/HEAT SHRINK, CABLE TAP SPLICES DIRECT BURIAL SPLICE KITS WITH HEAT SHRINK - SUBMERSIBLE connector that will accommodate 14/3 without GRD minimum and 8/3 with GRD maximum. 600 Volt, 105°C. Utilizes heavy wall shrink with sealant for a quick and reliable repair. 600-volt maximum, supplied in attractive, clear point-of-purchase packaging. 1.
PAGE 4
Splicing EASY-SPLICE™ “ROLL-ON” SPLICES/WRAP-AROUND UF SPLICE KITS EASY-SPLICETM DIRECT BURIAL “ROLL-ON” SPLICES FOR 1/C POWER CABLE - 1,000 V The easy “roll-on” way to insulate and seal cable connections up to 1,000 volts. The gripping force of the EPDM elastomer combines with high performance sealant to form a water resistant, UV resistant insulating sleeve appropriate for direct burial application over in-line compression connectors. For use on standard poly- or elastomeric-insulated cables.
PAGE 5
Splicing HEAVY WALL WITH SEALANT – DIRECT BURIAL & SUBMERSIBLE HEAVY WALL HEAT SHRINK WITH SEALANT – FOR DIRECT BURIAL AND SUBMERSIBLE APPLICATIONS For use on standard poly- or elastomericÃÕ>Ìi`É>ViÌi`ÊV>LiÃÊÀÊi>`>ViÌi`Ê cables, which may include aluminum or steel armoring. UL recognized per UL486D, CSA C22.2, ANSI C119.1-1986. RUS accepted for use as a secondary tap or splice cover. May be used for >ViÌÊÀi«>ÀÊÊV>LiÃÊÕ«ÊÌÊÎxÊ6° Heavy wall heat shrink is also available without sealant.
PAGE 6
Splicing DIRECT BURIAL SPLICE KITS / SELF-SEALING UF SPLICE KITS DIRECT BURIAL SPLICE KITS WITH RUBBER COVER Dual-rated for use with copper and aluminum cable, these kits consist of an in-line mechanical set screw connector pre-ﬁlled with oxide inhibitor, and an EPDM rubber insulating cover to ensure a watertight seal. UL listed, 600 volt rated. CATALOG NO. UPC CODE WIRE RANGE CONNECTOR LENGTH (INCHES) SHIPPING WEIGHT LBS.
PAGE 7
Splicing ”ROLL-ON” SPLICE/STUB CONNECTION KITS EASY-SPLICE™ DIRECT BURIAL “ROLL-ON” STUB CONNECTION INSULATION KITS End of Cap End of Sealant Easy-Splice™ ROSS stub kits offer the quick and easy “roll-on” way to insulate and seal stub connections in motors and street lights to 1,000 volts. The elastomeric cap provides the required insulation thickness, withstands abrasion, and forms a water-resistant seal. Suitable for use with a single conductor, 1,000 volt power cable.
PAGE 8
Splicing EASY-SPLICE™ “PUSH-ON” GEL STUB SPLICE KITS EASY-SPLICE™ “PUSH ON” GEL STUB SPLICE KITS A B D 1/ " 4 C max. Easy-Splice™ gel stub splice kits quickly and conveniently insulate, seal, and protect stub splice connections up to 1,000 volts. The robust yet compact design is engineered to handle the harsh environment of motor and many other connection applications (including street lights).
PAGE 9
Splicing THIN WALL TUBING THIN WALL TUBING Flexible ﬂame-retardant, thin wall, general purpose heat-shrinkable polyoleﬁn tubing has a 2:1 shrink ratio. Used for electrical insulation, ÜÀiÊ >ÀiÃÃÊLÕ`}]ÊÜÀiÊ>ViÌÊ>À}Ê>`Ê color coding, it also splices and makes functional terminations. Available in black, white, red, green, blue and clear. Standard packaging is either 6” lengths in blister boxes, or in iVV>ÊÓx½ÊÃ«Ã°Ê UL Recognized to Standard 224.
PAGE 10
Splicing THIN WALL TUBING THIN WALL TUBING CATALOG NO. UPC CODE EXPANDED I.D. RECOVERED I.D. NOMINAL RECOVERED WALL THICKNESS PACKAGING COLOR TWHS-312-6 TWHS-312-DS TWHS-312-48 TWHS-312 01368 01564 01369 01370 .312 .312 .312 .312 .156 .156 .156 .156 .025 .025 .025 .025 10 pieces x 6” (blister box) plastic spool – 96” 48” length 200 ft. spool black black black black TWHS-375-6 TWHS-375-DS TWHS-375-48 TWHS-375-25B TWHS-375-25W TWHS-375-25C 01371 01405 01372 01437 01438 01439 .375 .375 .375 .
PAGE 11
Splicing THIN WALL AND HEAVY WALL HEAT SHRINK KITS/END CAPS THIN WALL HEAT SHRINK KITS These kits have been carefully constructed to include the most common sizes and types in their category. The cases are made of extremely durable polypropylene and have heat sealed hinges. They DESCRIPTION CATALOG NO. UPC CODE THK 01171 provide the ultimate in organization and convenience. Clearly labeled on the inside lid for easy recognition. Convenient size for easy carrying and easy storing. KIT CONTAINS QTY.
PAGE 12
Splicing HOT-MELT SEALANT SLEEVES HOT-MELT SEALANT SLEEVES Split sealant tubes used to provide a cable block in multi conductor cables. Use a minimum of one sleeve for every two cable conductors. Install HWHS or CRS product over HMSS sealant sleeves to melt sealant sleeves and provide cable block. CATALOG NO. UPC CODE HMSS-4-40 01540 1.75 .160 HMSS-6-40 01541 1.75 .236 2010 CATALOG DIMENSIONS LENGTH INSIDE DIA.