Cut Sheet
Splicing
109 NSi
DIRECT BURIAL SPLICE KITS W/HEAT SHRINK, CABLE TAP SPLICES
600-volt maximum, supplied in attractive, clear
point-of-purchase packaging.
1. Copper Butt Splice Kits
Utilizing a mechanical copper butt splice and a
heavy wall heat shrink tubing to create a fully
insulated splice for copper conductors only.
2. Dual Rated Butt Splice Kits
Utilizing a mechanical dual rated splice and
matched heavy wall heat shrink tubing to create
an insulated splice for copper and/or aluminum
cables.
3. UF Cable Splice Kit
For simplified splicing of UF cable designed with
heavy wall heat shrink with sealant. This kit will
accommodate 14/3 through 8/3 with ground
UF cable and create a direct burial splice.
Contains one four-position connector.
4. UF Stretcher Kit
Eliminates the need for using two connectors
and a short piece of cable when repairing
damaged UF cable. Includes one 11.5”
connector that will accommodate 14/3 without
GRD minimum and 8/3 with GRD maximum.
600 Volt, 105°C. Utilizes heavy wall shrink with
sealant for a quick and reliable repair.
CATALOG
NO.
UPC
CODE
FIGURE RANGE
CARTON
QUATITY
SKCB-8 16900 1 #14 to #8 AWG 24
SKCB-2 16903 1 #8 to #2 AWG 24
SKAB-2 16910 2 #8 to #2 AWG 24
SKAB-0 16913 2 #6 to 1/0 AWG 24
SKAB-250 16916 2 1/0 AWG to 250 MCM 12
SKDB 16920 3 14/3 to 8/3 24
SKUF 16934 4 14/3 without ground to 8/3 with ground 12
DIRECT BURIAL SPLICE KITS WITH HEAT SHRINK - SUBMERSIBLE
Use as a wrap-around, sealed cable tap splice.
Coated with adhesive sealant, our WAHS kits
are qualified to ANSI C119.1986, rated to ICEA
electrical withstand test for 1,000 volts, and RUS
accepted for use with compression and split-bolt
connectors.
For use on standard poly- or elastomeric-
insulated conductors, UV resistant.
Kits are capable of insulating and sealing wye
(3-wire) or H (4-wire) configurations up to 1,000
volts. These kits do not include connectors. The
WAHS kits include insulating sleeve, sealant strip
and stainless steel channel closure.
CABLE TAP SPLICES FOR LOW VOLTAGE POWER CABLE
D
Main Main
Tap
Main
Main
Tap
D
CATALOG
NO.
UPC
CODE
CONNECTOR
TYPE
CONDUCTOR SIZE
SLEEVE LENGTH
(1,000V MAX.)
CONNECTOR
MAIN (AWH/kcmil) TAP (AWH/kcmil)
DIMENSION
(MAX. DIA.)
CTN.
QTY.
WAHS-2 16889 compression 6 (152) #8 – #2 #10 – #2 2 (51) 3
WAHS-4/0 16890
compression
standard split-bolt
8 (203)
8 (203)
#2 – 4/0
#8 - #2
#10 – 4/0
#14 - #2
4 (102)
1.5 (38)
3
WAHS-500 16891 compression 10 (254) 4/0 – 500 #2 – 500 6 (152) 3
1
2
3
4
SPLIT-BOLT CONNECTOR
COMPRESSION CONNECTOR