Cut Sheet

NSi Industries, LLC • 800.321.5847 • www.nsiindustries.com
105
CAT. NO. MATERIAL
WIRE
RANGE
NO. OF
CIRCUTS
TOTAL NO.
OF HOLES
LENGTH (IN.) HEIGHT (IN.) WIDTH (IN.)
HOLE
SPACING (IN.)
MTNG. HOLE
POSITION
STD.
CTN.
QTY.
2-14-12311 Aluminum 2-14 10 12 4.120 0.500 0.380 0.340 3 & 11 50
2/0-14-32 Aluminum 2/0-14 2 3 1.750 0.750 0.560 0.601 2 25
2/0-14-524 Aluminum 2/0-14 3 5 2.950 0.750 0.560 0.601 2 & 4 25
2/0-14-818 Aluminum 2/0-14 6 8 4.750 0.750 0.560 0.601 1 & 8 25
4C-14-616 Copper 4-14 4 6 1.940 0.440 0.310 0.312 1 & 6 100
4C-14-717 Copper 4-14 5 7 2.250 0.440 0.310 0.312 1 & 7 100
4C-14-818 Copper 4-14 6 8 2.56 0.440 0.310 0.312 1 & 8 100
4C-14-14114 Copper 4-14 12 14 4.430 0.440 0.310 0.312 1 & 14 50
4C-14-15313 Copper 4-14 13 15 4.740 0.440 0.310 0.312 3 & 13 50
4C-14-15611 Copper 4-14 13 15 4.740 0.440 0.310 0.312 6 & 11 50
4C-190* Copper 4-14 190 190 60.000 0.440 0.310 0.312 – 10
2C-14-515 Copper 2-14 3 5 2.000 0.500 0.380 0.397 1 & 5 50
2C-14-827 Copper 2-14 6 8 3.250 0.500 0.380 0.397 2 & 7 50
FEATURES
• Multiple connectors are made from either copper or aluminum bar and can be used in a variety of neutral and grounding
applications. Aluminum connectors are tin plated for low contact resistance and are suitable for use with copper or aluminum
conductors. Aluminum connectors are dual rated for use with aluminum and copper cables.
• Copper connectors are suitable for use with copper wire only.
• *Supplied with screws unassembled.
CONNECTORS
Multiple Connectors
Used in Neutral Assemblies & Grounding Applications
Cont’d