Cut Sheet

49
CONNECTORSCONNECTORS
MECHANICAL CONNECTORS
Wedge & Hot-Line Clamps,
Service Entrance Connector
W, HLC, EC SERIES
CAT.
NO.
WIRE RANGE
LENGTH
(L)
WIDTH
(W)
STD.
CTN.
QTY.
ACSR ALUMINUM AAAC
W62-1 2-6 1 STR-6 SOL 2-6 12.000 2.375 12
W62-1FC 2-6 1 STR-6 SOL 2-6 17.500 FLEX 12
W20-1 1/0-4 2/0 STR-2 SOL 1/0-4 12.500 2.375 8
W20-1FC 1/0-4 2/0 STR-2 SOL 1/0-4 18.500 FLEX 8
W40-1 4/0-2/0 4/0 STR-2/0 SOL 4/0-2/0 12.750 2.375 6
W40-1FC 4/0-2/0 4/0 STR-2/0 SOL 4/0-2/0 18.500 FLEX 6
CAT.
NO.
MAIN TAP
LENGTH
(L)
WIDTH
(W)
HEIGHT
(H)
STD.
CTN.
QTY.
CONDUCTOR
RANGE
WIRE
DIAMETER
CONDUCTOR
RANGE
WIRE
DIAMETER
HLC-2/0 8 sol - 2/0 str .128/.414 8 sol - 2/0 str .128/.414 4.119 2.550 2.120 1
HLC-400
6 sol - 400MCM .162/.745 8 sol - 4/0 str .128/.547 4.716 2.900 1.348 1
ALUMINUM SERVICE WEDGE CLAMPS
For dead-ending self-supporting drop wire.
Saves conductor – drop wire may be cut to exact length.
Can be attached to bare neutral in any point in the span.
Adjustment in drop wire sag are easily made.
Grips ACSR, AAAC or aluminum conductor.
COPPER HOT LINE CLAMPS
Clamping stem is manufactured from high strength
silicon bronze.
Saddle is made of high strength copper alloy, ensuring
continued clamping force on the main conductor.
Threads of clamping stem are protected to prevent
damage due to arcing.
Double coil stainless steel washer maintains continuous
pressure on the main conductor.
Retainer pin captivates the saddle for easy installation.
SERVICE ENTRANCE CONNECTOR
Body and screw are of high strength, corrosion resistant
copper alloy, 600V.
CAT.
NO.
WIRE
RANGE
TORQUE VALUE (IN./LBS.) HEX/WRENCH SIZE
STD.
CTN.
QTY.
EC12 12 str 35 1/4 100
EC6 6 str 45 5/16 100
EC4 4 str 45 3/8 100
EC2 2 str 50 7/8 100
SERVICE ENTRANCE CONNECTOR:
Body and screw are of high strength,
corrosion-resistant copper alloy.
TEMPERATURE RATING:
90 °C.
VOLTAGE:
600V (2000V max. per UL486B).
UL486A/B Listed Wire Connector.
RATINGS
FEATURES