User's Manual

MiCard Installation Guide_english_V2.doc
© NT-ware 4
Introduction
MiCard provides an easy to use, easy to install and cost effective solution for identification
with a contactless card at your Canon iR. With MiCard you simply wave your card over the
reader and you will be identified. After identification the Canon iR opens up and you are able
to make your copies or pick up your secure print jobs.
Installation and configuration has never been easier. You simply connect the MiCard via USB
directly to the device. Even power is supplied via USB, thus providing a cost effective
solution by removing the expense normally required for an additional interface. After
connecting MiCard to the device, it will automatically be recognized and configured by the in
the Canon iR integrated uniFLOW MEAP application.
There are many different technologies for Remote Frequency Identification (RFID) on the
market. Therefore, for additional flexibility, MiCard is available in 3 different versions, MiCard
HiTag, MiCard Legic/MiFare, and MiCard HID Prox, all supporting different RFID frequencies
and technologies.
The new series MiCard V2 consists of the three models: MiCrad V2 HID, MiCard V2 HiTag
and MiCard V2 Multi.
The uniFLOW MEAP application embedded in the Canon iR will also make your life in the
office easier. You can use it for printing confidential information securely. Simply select the
print job you want to print directly from the control panel of the Canon iR, without the risk of
interception by others.
Additionally it can be used for charging back copy jobs to cost centres, departments or
customers, printing of general/internal company documents, or the authentication into other
applications like for instance eCopy.
Scope of supply
The MiCard reader package consists of the MiCard Reader itself and the appertaining
connection cable.