User's Manual

MiCard Installation Guide_english_V2.doc

In the following please find an explanation of the terms used and the possible

settings on the configuration site:

Connected ID Module

shows the ID Module connected, e.g. MiCard / miniMIND

Last Read ID

shows the last ID read by a card swipe

Conversion Result

shows the result of the last read ID when the configured code

conversions are applied. This is the ID sent to the server for authentication.

Code Remove First

specifies the number of characters to be removed from the ID read before the code

conversion takes place. For instance a value of 3 applied to A881C045 will result in

1C045.

Code Remove Last

specifies the number of characters to be removed at the end of the ID read before

the code conversion takes place. For instance a value of 3 applied to A881C045 will

result in A881C.

Code Length

specifies the code length applied after the code conversion. For instance a value of 6

applied to A881C045 will result in A881C0, whereas a value of 10 applied to

A881C045 will result in 00A881C045.