User's Manual

uniFLOW Release Station
10
Status
LED color/Beep
Synchronized (idle)
steady red
Reading/Hold
green with beep
uniFLOW Release Station Touch
The uniFLOW Release Station Touch does not have any LEDs. Neither does it have a
beeper.
Network Port LED (all models)
Status
LED color
A link to a network is established.
green
A link to a network is established
and data is transmitting.
green flashing
The network speed is 100 Mbit/s.
yellow ON
The network speed is 10 Mbit/s.
yellow OFF
9 Mounting Options
There are different ways of mounting the uniFLOW Release Station. Depending on the
device manufacturer and model, the uniFLOW Release Station can either be attached
directly to the machine using a device bracket, be mounted to the wall or be set up on
a stand pole next to the machine.
Brackets are sold separately and are not included by default with the uniFLOW Release
Station.
For a detailed list of all available mounting options, please refer to the NT-ware
Accessory Guide which can be found on the NT-ware Partner Site
(https://web.nt-ware.net/partner/).
10 Copy Control Cables
A copy control cable is needed to make use of uniFLOW copy accounting options. The
cables are developed by NT-ware to make them fit to the uniFLOW Release Station.