Datasheet

NTE580
General Purpose Silicon Rectifier
Fast Recovery
Features:
D High Temperature Metallurgically Bonded–No Compression Contacts
D Fast Switching for High Effeciency
D 3A Operation at T
A
= +25°C with No Thermal Runaway
Maximum Ratings and Electrical Characteristics:
(T
A
= +25°C unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%)
Maximum Recurrent Peak Reverse Voltage 600V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum RMS Voltage 420V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum DC Blocking Voltage 600V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Average Forward Rectified Current (.375” (9.5mm) Lead Length, T
A
= +75°C) 3A. . . . . .
Peak Forward Surge Current (8.3ms Single Half Sine–Wave Superimposed on Rted Load) 100A.
Maximum Instantaneous Forward Voltage (I
F
= 3A) 1.3V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum DC Reverse Current (V
DC
= 600V, T
A
= +25°C) 5µA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Average Reverse Current (P
RV
= 600V)
T
A
= +25°C 2µA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T
A
= +100°C 100µA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Reverse Recovery Time (Note 1) 150ns. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Typical Junction Capacitance (Note 2) 65pF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Junction Temperature Range, T
J
–65° to +175°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage Temperature Range, T
stg
–65° to +175°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature (During Soldering, .375” (9.5mm) from case, 10sec), T
L
+350°C. . . . . . . . . . . . . .
Note 1. Reverse Recovery Test Conditions: I
F
= 0.5A, I
R
= 1.0A, I
RR
= 0.25A.
Note 2. Measured at 1MHz and applied reverse voltage of 4V.
Color Band Denotes Cathode
.180 (4.6) Max.042 (1.07) Max
1.000
(25.4)
Min
.300 (7.6) Max