User manual

11
Outdoor Microphone
Insert M2230 Measurement Microphone
Connect the M2230 measurement microphone to the fe-•
male XLR of the ASD Cable.
Insert the M2230 measurement microphone into the upper •
body tube so that the bottom end of the microphone is in line
with the bottom end of the upper body tube. Align the fixing
screw hole of the upper body tube with the lower screw
of the M2230 measurement microphone (remove the fixing
screw to see the lower screw head through the fixing screw
hole).
Fixing Screw Hole
Lower screw
of M2230
measurement
microphone
Alternatively the Measurement Microphone
M2211 or M2215 can be fitted into the Weather
Protection WP30. These microphones have
to be pushed further into the upper body by
3 mm. The top part of the capsule has to be
13 mm above the upper body housing of the
WP30. This is required because the M2211 and
M2215 capsule is 3 mm shorter than the default
M2230 microphone capsule.