User's Manual

Connectivity

See VSAT Installation Manual or Tools Menu-Internet Adaptor Setup

Video

• Modulate and Insert the two iTV channels into the existing distribution system.

Audio

• Connect the provided audio cables from the PC’s sound output to the modulator’s

audio inputs so the NTN system will be ready for future sound features.

RF Delivery

When installing antenna line, be sure to permanently mount the antenna after verifying

range within the playing area. For optimal coverage, antenna should be in line-of-sight to the

center of the playing area. However, given cable length restrictions, it is probable that the

antenna will merely penetrate the periphery of the playing area. This is acceptable.

• Used the 25 ft or 100 ft antenna cable provided by NTN.

• Antenna must be placed at least 7 ft high and in the quietest location, as determined by

signal/noise diagnostics.

• Turn on and test all Playmakers.

• Relocate the RF antenna if necessary.

• Once the best antenna location is determined, permanently mount the antenna.

Restrictions

Do not:

• Locate antenna near any potential sources of interference to the NTN system (neon and

fluorescent lights, projection TVs, electrical lines, electrical panel’s etc.)

• Allow antennae mount to come in contact with any metal.

• Run cable parallel to electrical lines.

• Splice cable.

• Mount antenna with any mirror between the antenna and the playing area.

• Use more than 1 antenna.