Safety Information

Page 30 of 60 Report No. WUX202107133461UL
UL 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC62368_1C
G.5.4.3
Running overload test
N/A
G.5.4.4.2
Locked-rotor overload test
N/A
Test duration (days)
...................................................
:

G.5.4.5
Running overload test for DC motors
N/A
G.5.4.5.2
Tested in the unit
N/A
G.5.4.5.3
Alternative method
N/A
G.5.4.6
Locked-rotor overload test for DC motors
N/A
G.5.4.6.2
Tested in the unit
N/A
Maximum Temperature ............................................. :
N/A
G.5.4.6.3
Alternative method
N/A
G.5.4.7
Motors with capacitors
N/A
G.5.4.8
Three-phase motors
N/A
G.5.4.9
Series motors
N/A
Operating voltage ....................................................... :

G.6
Wire Insulation
P
G.6.1
General
UL recognized VW-1 wires for
internal connections
P
G.6.2
Enamelled winding wire insulation
The solvent-based enamel
winding wire was not used as
insulation
P
G.7
Mains supply cords
P
G.7.1
General requirements
Approved mains supply cords
used
P
Type
...............................................................................
:

G.7.2
Cross sectional area (mm
2
or AWG)........................ :
P
G.7.3
Cord anchorages and strain relief for non-
detachable power supply cords
P
G.7.3.2
Cord strain relief
P
G.7.3.2.1
Requirements
P
Strain relief test force (N)
...........................................
:
60N
P
G.7.3.2.2
Strain relief mechanism failure
P
G.7.3.2.3
Cord sheath or jacket position, distance (mm)
.......
:
0.1mm
P
G.7.3.2.4
Strain relief and cord anchorage material
N/A
G.7.4
Cord Entry
N/A
G.7.5
Non-detachable cord bend protection
N/A
G.7.5.1
Requirements
N/A