Safety Information

Page 32 of 60 Report No. WUX202107133461UL
UL 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC62368_1C
Type test voltage V
ini,a
................................................. :

Routine test voltage, V
ini, b
..........................................
:

G.13
Printed boards
P
G.13.1
General requirements
P
G.13.2
Uncoated printed boards
P
G.13.3
Coated printed boards
N/A
G.13.4
Insulation between conductors on the same inner
surface
N/A
G.13.5
Insulation between conductors on different surfaces
N/A
Distance through insulation........................................:
N/A
Number of insulation layers (pcs) ............................ :

G.13.6
Tests on coated printed boards
N/A
G.13.6.1
Sample preparation and preliminary inspection
N/A
G.13.6.2
Test method and compliance
N/A
G.14
Coating on components terminals
N/A
G.14.1
Requirements .............................................................. :
(See Clause G.13)
N/A
G.15
Pressurized liquid filled components
N/A
G.15.1
Requirements
N/A
G.15.2
Test methods and compliance
N/A
G.15.2.1
Hydrostatic pressure test
N/A
G.15.2.2
Creep resistance test
N/A
G.15.2.3
Tubing and fittings compatibility test
N/A
G.15.2.4
Vibration test
N/A
G.15.2.5
Thermal cycling test
N/A
G.15.2.6
Force test
N/A
G.15.3
Compliance
N/A
G.16
IC including capacitor discharge function (ICX)
N/A
G.16.1
Condition for fault tested is not required
N/A
ICX with associated circuitry tested in equipment
N/A
ICX tested separately
N/A
G.16.2
Tests
N/A
Smallest capacitance and smallest resistance
specified by ICX manufacturer for impulse test
......
:

Mains voltage that impulses to be superimposed on
........................................................................................
:
