Safety Information

Page 37 of 60 Report No. WUX202107133461UL
UL 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC62368_1C
P.3.3
Spillage safeguards
N/A
P.3.4
Compliance
N/A
P.4
Metallized coatings and adhesives securing parts
N/A
P.4.1
General
N/A
P.4.2
Tests
N/A
Conditioning, T
C
(°C)
...................................................
:

Duration (weeks)..........................................................:

Q
CIRCUITS INTENDED FOR INTERCONNECTION WITH BUILDING WIRING
P
Q.1
Limited power sources
P
Q.1.1
Requirements
P
a) Inherently limited output
P
b) Impedance limited output
N/A
c) Regulating network limited output
N/A
d) Overcurrent protective device limited output
P
e) IC current limiter complying with G.9
N/A
Q.1.2
Test method and compliance.....................................:
(See appended table Q.1)
P
Current rating of overcurrent protective device (A)
........................................................................................
:
P
Q.2
Test for external circuits – paired conductor
cable
N/A
Maximum output current (A) ..................................... :
N/A
Current limiting method...............................................:

R
LIMITED SHORT CIRCUIT TEST
N/A
R.1
General
N/A
R.2
Test setup
N/A
Overcurrent protective device for test...................... :

R.3
Test method
N/A
Cord/cable used for test
.............................................
:

R.4
Compliance
N/A
S
TESTS FOR RESISTANCE TO HEAT AND FIRE
N/A
S.1
Flammability test for fire enclosures and fire barrier materials of equipment
where the steady state power does not exceed 4 000 W
N/A
Samples, material
........................................................
:

Wall thickness (mm)
....................................................
:

Conditioning (

C)......................................................... :
