Safety Information

Page 51 of 60 Report No. WUX202107133461UL
UL 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC62368_1C
T.2, T.3,
T.4, T.5
TABLE: Steady force test
P
Part/Location
Material
Thickness
(mm)
Probe
Force
(N)
Test
Duration
(s)
Observation
Plastic enclosure
top
Plastic
Min. 1.5
--
250
5
No damaged, No
hazards
Plastic enclosure
Bottom
Plastic
Min. 1.5
--
250
5
No damaged, No
hazards
Plastic enclosure
side
Plastic
Min. 1.5
--
250
5
No damaged, No
hazards
Internal
component
Plastic
Min. 1.5
--
10
5
No damaged, No
hazards
Supplementary information:
T.6, T.9
TABLE: Impact test
Location/part
Material
Thickness
(mm)
Height
(mm)
Observation
Completed equipment
Plastic
Min. 1.5
1300
No energy source exceed
class 1 can be accessed
Supplementary information:
T.7
TABLE: Drop test
P
Location/part
Material
Thickness
(mm)
Height
(mm)
Observation
Enclosure top
Plastic
Min. 1.5
1000
No damaged, No hazards
Enclosure bottom
Plastic
Min. 1.5
1000
No damaged, No hazards
Enclosure side
Plastic
Min. 1.5
1000
No damaged, No hazards
Supplementary information:
T.8
TABLE: Stress relief test
P
Location/Part
Material
Thickness
(mm)
Oven Temperature
(C)
Duration
(h)
Observation